Bullseye Leak Detector
$4,400.00
The only system that quickly and precisely locates leaks of all sizes, large to very small!
Approved as GM Dealer Equipment!
Includes all the essentials for finding leaks in A/C systems, EVAP systems, engine cooling systems, head gaskets, tires and wheels, air ride suspensions, air brakes, and much more… plus it includes the time saving Smart Control and our AC Charge Hose Kits.Â
BULLSEYE Leak Detector
quickly and precisely locates the leak site.
BULLSEYE Leak Seeker Foam
sprays onto leak site & changes color to indicate exact location.
BULLSEYE Leak Detector
Accurately finds head gasket problems.
BULLSEYE Leak Detector
Quickly finds wheel and tire problems.
Explore what comes in the kits
BULLSEYE Leak Detector IR CO2 Sensor
The CO2 detector will accurately locate leak sites from very large to very small (down to several PPM of CO2).
Smart AC Charger for BULLSEYE IR CO2 Sensor
This charger recharges the batteries in the CO2 detector
High Pressure Regulator
This high pressure regulator adjusts CO2 gas tank pressure from 10 psi to 225psi.
EVAP Service Port Tap
This fitting adapts to most EVAP fuel tank test ports.
EVAP Hose Connection
This fitting allows you to put CO2 into systems where a hose connection is needed to test with.
Industrial Canister Adapter
This adapts the high pressure regulator to an industrial CO2 bottle.
Smart Control Battery Lead
Smart Control Vent Lead (Yellow)
This lead connects the Smart Control to the solenoid.
Smart Control Purge Lead (Blue)
This lead connects the Smart Control to the solenoid.
A/C CO2 R134a Charge Hose
This hose kit allows CO2 to be put into R134a A/C systems.
A/C CO2 1234YF CO2 Charge Hose
This hose kit allows CO2 to be put into 1234YF A/C systems.
Oneshot Leak Seeker Foam 4 pack (patented)
This Patented Foam will change color directly over the leak site, allowing quick and easy leak identification. This foam will change color from large to very small leaks.
Low Pressure Regulator
This low psi regulator allows pressures to be regulated from 1 psi to 14 inch of water column.
CO2 Fill Hose
This fill hose allows the CO2 tank to be located up to 13 feet from the vehicle under test.
CO2 Cylinder 90G 2 Pack
These CO2 cylinders allow you to complete testing as soon as you get your kit. It is best to use a 20 lb commercial tank (this is the size used by restaurant soda machines).
BULLSEYE Burst Disk Kit
This kit allows you to change the high pressure regulator safety burst disc if it blows from over pressure conditions.
Safety Glasses
When pressurizing systems with pressure you must wear eye protection.
Distilled Water Wash
The water wash washes area off before or after applying Oneshot Leak Seeker foam. This cleans the area of unwanted acid on the test site.
Back Probes
These allow leads to be connected to solenoids.
Caplug Kit
This kit allows system openings to be plugged for sealed testing.
Smart Control (patented)
The smart control is an advanced system to control solenoids of all types that use a ground control. With this unit just connect either lead, no wiring diagram needed, to power and control and the Smart Control will automatically control the ground control. No more guessing and blowing fuses; it really is that easy!
FINDS LEAKS in all sealed systems in just 3 easy steps!
1. The BULLSEYE CO2 regulator pressurizes the sealed system.
2. The BULLSEYE Leak Detector finds the area of the leak.
3. The BULLSEYE Leak Seeker Foam changes color to pinpoint the leak.
