$195.00 – $245.00
The Resistance Decade Box is ideal for testing automotive sensors and circuits
The Resistance Decade Box is ideal for testing automotive sensors and circuits; just insert the Decade Box in place of the sensor and dial in the resistance value that you would like to apply to the circuit. Once the resistance is adjusted properly; check the voltage of the circuit with a DVOM, scope, or scan tool. When checking sensors such as variable reluctance sensors; insert the Decade Box across the two leads of the sensor and set the resistance for about 1000ohms. Now check the sensors output with a scope to see if the voltage amplitude is correct. The Resistance Decade Box is quick and easy to use in many different automotive applications and is a must have tool for the automotive electronic technician.
Just like the Resistance Decade Box, the Capacitance Decade Box is also ideal for testing automotive sensors and circuits; just insert this Decade Box into the circuit that shows noise present on your oscilloscope. Now simply switch in capacitance values until the noise is no longer present or is limited in its amplitude. The technician quickly rules out noise riding on the circuit being the problem. If the noise is the problem simply check the capacitance value that has been selected and install a hard wired capacitor into the circuit for a quick fix.
Runs on most Intel or AMD Processor Windows based PC with type A USB 2.0 port.
Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor.
Windows 7 Service Pack 1 through Windows 11 operating systems including Windows 11 tablets
(Windows RT tablets are not supported)