eSCOPE ELITE4
$2,925.00 – $7,495.00
The ATS eSCOPE ELITE4 is the industries best automotive diagnostic scope and signal tester. A 4-channel scope with built-in tests, signal generators and outputs. Available in three configurations.
NEWLY ADDED DTC Stop Scope feature allows the Automotive Test Solutions eSCAN ELITE (purchased separately) to stop the eSCOPE ELITE Deep Record when a pending, or permanent DTC is set. This ensures a data capture at that moment.
Capture All Data: ATS’ unique circular buffer system does not drop data. No data gap will ever be present on our scopes; this means you will never lose data that occurs between samples on an intermittent fault or fail to capture the vehicle’s faulty event.
Ultra Sharp Wave-forms: No need for filters that can mask data. ATS designs our scopes so the signal is accurate and clean.
Dual Time Base: This allows two different frequencies to be displayed on one screen with two different scope displays, simultaneously. This also allows separate triggers and/or trigger modes on each time base. It’s like having two scopes in one.
Pull Down Circuit: A Controlled pulse that sinks power from vehicle circuit to ground. Control circuits like ignition coils, fuel injectors and solenoids.
TTL Output: Sends a 0-5v square wave signal out of scope. Turn on devices such as ignition coil drivers, test vehicle’s circuits, and test vehicle’s circuits for loading.
Automatic Test Lead Connection Detection: This unique feature allows you to know the scope lead has a good connection. “Red”= Bad connection. “Green”= Good connection. It’s that easy!
No Time, Voltage, or Trigger Setup Needed: With the powerful Deep Record function, you can grab a large amount of data without any setup at all. Then simply zoom in to see what happened! Turn signals on/off, and rearrange waveforms as you wish. Saved files can be reopened and manipulated in the same way at any time.
Automatic voltage attenuator: Just change the voltage setting and the scope does the rest.
Pressure Transducers: Drives four pressure transducers at once with full pressure/vacuum conversions.
Patented Overlay Technology: ATS’ unique programming overlays an engine cycle grid over your waveforms. Works great with pressure transducers!
Which Is Best For You?
ELITE4
- 4-Channel Scope
- Separate colors for each channel that match leads
- 16 bit (65,536 discrete levels). This gives very fine voltage resolution over a very large voltage range. I.E. +/-20 volt range has a 0.0006 mV resolution
- 1 Mega samples per second
- Up to +/-500V software selectable attenuator built into scope
- Dual Screen, Single Screen, Stacked Scope, Measure and Deep record, and Meter
- Deep Record Mode. Record data without any setup at all and without missing any data
- Drives four pressure transducers at once with full Pressure / Vacuum conversions and patented pressure transducer overlays
- Ignition analyzer
- PC Compatible. Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor
- Powered via PC’s USB 2.0 or 3.0 connector
- Unlimited Storage of waveforms and settings
- Built in help plus U.S. based customers receive live one-on-one log in support
ELITE4 with Surface Pro
- 4-Channel Scope
- Separate colors for each channel that match leads
- 16 bit (65,536 discrete levels). This gives very fine voltage resolution over a very large voltage range. I.E. +/-20 volt range has a 0.0006 mV resolution
- 1 Mega samples per second
- Up to +/-500V software selectable attenuator built into scope
- Dual Screen, Single Screen, Stacked Scope, Measure and Deep record, and Meter
- Deep Record Mode. Record data without any setup at all and without missing any data
- Drives four pressure transducers at once with full Pressure / Vacuum conversions and patented pressure transducer overlays
- Ignition analyzer
- PC Compatible. Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor
- Powered via PC’s USB 2.0 or 3.0 connector
- Unlimited Storage of waveforms and settings
- Built in help plus U.S. based customers receive live one-on-one log in support
- Surface Pro 7 Tablet
ELITE4 with iEA Intelligent Engine Analyzer
- 4-Channel Scope
- Separate colors for each channel that match leads
- 16 bit (65,536 discrete levels). This gives very fine voltage resolution over a very large voltage range. I.E. +/-20 volt range has a 0.0006 mV resolution
- 1 Mega samples per second
- Up to +/-500V software selectable attenuator built into scope
- Dual Screen, Single Screen, Stacked Scope, Measure and Deep record, and Meter
- Deep Record Mode. Record data without any setup at all and without missing any data
- Drives four pressure transducers at once with full Pressure / Vacuum conversions and patented pressure transducer overlays
- Ignition analyzer
- PC Compatible. Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor
- Powered via PC’s USB 2.0 or 3.0 connector
- Unlimited Storage of waveforms and settings
- Built in help plus U.S. based customers receive live one-on-one log in support
- Surface Pro 7 Tablet
- iEA Software License
- Compression adapters (14mm, 18mm)
- Pressure transducer cables
- iEA Amplifier
- Exhaust Tailpipe hose
- iEA Spark test with RF Filter
- iEA Exhaust Sensor
- -30 hg Vacuum Transducer
- 300 psi Transducer
- 500 psi transducer
- Vacuum Test Hose
- Hose Adapters with Quick Coupler
Need More Channels?
The eSCOPE ELITE8 Has You Covered!
eSCOPE ELITE8
The ATS eSCOPE ELITE8 is the industries best automotive diagnostic scope and signal tester. An 8-channel scope with built-in tests, signal generators and outputs. Available in three configurations.
System Requirements
Runs on most Intel or AMD Processor Windows based PC.
Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor.
