Automotive Test Solutions Automotive Test Solutions
  • Products
  • Support
  • Software Updates
  • Training Events
  • Knowledge Base
  • About

eSCOPE ELITE8

eSCOPE ELITE8
eSCOPE ELITE8 - Image 2

$4,700.00

The ATS eSCOPE ELITE8 is the industries best automotive diagnostic scope and signal tester. A 8-channel scope with built-in tests, signal generators and outputs. Available in three configurations.

Category: eSCOPE ELITE8
  • Description
  • Kit Contents
  • System Requirements

NEWLY ADDED DTC Stop Scope feature allows the Automotive Test Solutions eSCAN ELITE (purchased separately) to stop the eSCOPE ELITE Deep Record when a pending, or permanent DTC is set. This ensures a data capture at that moment.

Capture All Data: ATS’ unique circular buffer system does not drop data. No data gap will ever be present on our scopes; this means you will never lose data that occurs between samples on an intermittent fault or fail to capture the vehicle’s faulty event.

Ultra Sharp Wave-forms: No need for filters that can mask data. ATS designs our scopes so the signal is accurate and clean.

Dual Time Base: This allows two different frequencies to be displayed on one screen with two different scope displays, simultaneously. This also allows separate triggers and/or trigger modes on each time base. It’s like having two scopes in one.

Pull Down Circuit: A Controlled pulse that sinks power from vehicle circuit to ground. Control circuits like ignition coils, fuel injectors and solenoids.

TTL Output: Sends a 0-5v square wave signal out of scope. Turn on devices such as ignition coil drivers, test vehicle’s circuits, and test vehicle’s circuits for loading.

Automatic Test Lead Connection Detection: This unique feature allows you to know the scope lead has a good connection. “Red”= Bad connection. “Green”= Good connection. It’s that easy!

No Time, Voltage, or Trigger Setup Needed: With the powerful Deep Record function, you can grab a large amount of data without any setup at all. Then simply zoom in to see what happened! Turn signals on/off, and rearrange waveforms as you wish. Saved files can be reopened and manipulated in the same way at any time.

Automatic voltage attenuator: Just change the voltage setting and the scope does the rest.

Pressure Transducers: Drives four pressure transducers at once with full pressure/vacuum conversions.

Patented Overlay Technology: ATS’ unique programming overlays an engine cycle grid over your waveforms. Works great with pressure transducers!

Which Is Best For You?

ELITE8

  • 8-Channel Scope
  • Separate colors for each channel that match leads
  • 16 bit (65,536 discrete levels).  This gives very fine voltage resolution over a very large voltage range.  I.E. +/-20 volt range has a 0.0006 mV resolution
  • 1 Mega samples per second
  • Up to +/-500V software selectable attenuator built into scope
  • Dual Screen, Single Screen, Stacked Scope, Measure and Deep record, and Meter
  • Deep Record Mode. Record data without any setup at all and without missing any data
  • Drives four pressure transducers at once with full Pressure / Vacuum conversions and patented pressure transducer overlays
  • Ignition analyzer
  • PC Compatible. Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor
  • Powered via PC’s USB 2.0 or 3.0 connector
  • Unlimited Storage of waveforms and settings
  • Built in help plus U.S. based customers receive live one-on-one log in support

ELITE8 with Surface Pro

  • 8-Channel Scope
  • Separate colors for each channel that match leads
  • 16 bit (65,536 discrete levels).  This gives very fine voltage resolution over a very large voltage range.  I.E. +/-20 volt range has a 0.0006 mV resolution
  • 1 Mega samples per second
  • Up to +/-500V software selectable attenuator built into scope
  • Dual Screen, Single Screen, Stacked Scope, Measure and Deep record, and Meter
  • Deep Record Mode. Record data without any setup at all and without missing any data
  • Drives four pressure transducers at once with full Pressure / Vacuum conversions and patented pressure transducer overlays
  • Ignition analyzer
  • PC Compatible. Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor
  • Powered via PC’s USB 2.0 or 3.0 connector
  • Unlimited Storage of waveforms and settings
  • Built in help plus U.S. based customers receive live one-on-one log in support
  • Surface Pro 7 Tablet

ELITE8 with iEA Intelligent Engine Analyzer

  • 8-Channel Scope
  • Separate colors for each channel that match leads
  • 16 bit (65,536 discrete levels).  This gives very fine voltage resolution over a very large voltage range.  I.E. +/-20 volt range has a 0.0006 mV resolution
  • 1 Mega samples per second
  • Up to +/-500V software selectable attenuator built into scope
  • Dual Screen, Single Screen, Stacked Scope, Measure and Deep record, and Meter
  • Deep Record Mode. Record data without any setup at all and without missing any data
  • Drives four pressure transducers at once with full Pressure / Vacuum conversions and patented pressure transducer overlays
  • Ignition analyzer
  • PC Compatible. Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor
  • Powered via PC’s USB 2.0 or 3.0 connector
  • Unlimited Storage of waveforms and settings
  • Built in help plus U.S. based customers receive live one-on-one log in support
  • Surface Pro 7 Tablet
  • iEA Software License
  • Compression adapters (14mm, 18mm)
  • Pressure transducer cables
  • iEA Amplifier
  • Exhaust Tailpipe hose
  • iEA Spark test with RF Filter
  • iEA Exhaust Sensor
  • -30 hg Vacuum Transducer
  • 300 psi Transducer
  • 500 psi transducer
  • Vacuum Test Hose
  • Hose Adapters with Quick Coupler

Let our Advanced Support Team help you use your ATS equipment.

An ATS FIRST TECH Support specialist will log onto your PC and help you understand your new tool; in your shop on your own computer.

ATS will help you with each step along the way.

  • Make sure our software is loaded and working correctly
  • Answer questions about how your new equipment works.

Kit Contents

eSCOPE ELITE 8

Inductive Pickup with BNC Connection (EIG 1110)

 

“T” Wire Piercers: Yellow, Red, Green, Blue, White, Violet, Orange, Brown (ESP1010)

 

Gator Clips: Yellow, Red, Green, Blue, White, Violet, Orange, Brown, Black, Red  (ESP1030)

 

CA-60 Low Current Amp Clamp (ESP1050SM)

 

CA-600 High Current Amp Clamp (ESP1050LG)

 

Banana Plug Adapters (ESP1070)

 

Scope Leads: Aux, Violet, Orange, Brown, Yellow, Red, Green, Blue and White (ESP2000)

12ft Lead Extensions: Yellow, Red, Green, Blue, White, Violet, Orange, Brown, Black (ESP1101)

 

Banana Plug Lead (Red) (ESP2090 – Aux)

Battery Ground Cable (ESP1090 – Ground)

 

Back Probes: Yellow, Red, Green, Blue, White, Violet, Orange, Brown (ESP2160)

 

Extra Scope Fuses

System Requirements

Runs on most Intel or AMD Processor Windows based PC.

Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor or the Snapdragon® X Elite and Plus processors used in the Microsoft Surface Pro 11th Edition.

Windows 7 Service Pack 1 through Windows 11 operating systems including Windows 11 tablets

(Windows RT tablets are not supported)

Company Information

Limited Warranty

Privacy Policy

Documents

Patents

SDS

Want to be kept in the loop?

Sign up for newsletter here
sales@automotivetestsolutions.com Send us an email!
505-265-5077 Call now!
515 Wyoming Blvd SE Ste A, Albuquerque, NM 87123
Automotive Test Solutions 2024 - All Rights Reserved.