Pressure Pro Kit
$1,895.00
Pressure Pro, 300 PSI Transducer, -30 HG Vacuum Transducer, EMissFire Exhaust Sensor (-20 H2O), 2 Pressure Transducer Cables, Phono Jack to Phono Jack Cable, 3 Pressure Pro to Scope BNC Cables, 14mm Stainless Steel Compression Tester Adapter, 18mm Stainless Steel Compression Tester Adapter, Exhaust Tailpipe Hose, Quick Connect Coupler – Small, 1/4″ Hose Adapter, 3/8″ Hose Adapter
A Pressure Transducer kit
for use with Pico, Snap-On and Autel oscilloscopes.
Everything you need to get started is included!
Pressure Pro
The Pressure Pro allows three pressure transducers to be powered, grounded, and supplies output signals simultaneously. The Pressure Pro allows all three sensors to be independently zeroed. This unit will allow the user to use and display three different pressure transducers on the oscilloscope at once, thus helping with the mechanical testing of engines. When testing the internal combustion engine you will need to monitor in-cylinder pressure (300 PSI Gasoline, or 500 PSI Diesel), induction pressure (-30 Hg), and exhaust pressure (+/- 25 H20) simultaneously.
300 PSI Transducer
-30 PSI Transducer
Exhaust Sensor
Pressure Transducer Cables
Phono to Phono Jack Cable
Pressure Pro to Scope BNC Cable
BNC to Banana Plug Cables
Exhaust Tailpipe Hose
18mm Stainless Steel Compression Tester Adapter
14mm Stainless Steel Compression Tester Adapter
Quick Connect Coupler - Small
1/4" Hose Adapter
3/8" Hose Adapter
